Abstract
During pressurized thermal shock (PTS) transient, the surface crack near the inlet nozzle region of a reactor pressure vessel (RPV) may propagate constantly and even through the thickness of base wall. The temperature dependent material properties are introduced to evaluate the thickness effects of base wall and inlet pipe on the integrity of the structure. By means of elastic and elastic-plastic fracture analysis, the different ultimate internal pressure values related to nil-ductility reference temperature for various base wall thicknesses are compared. It is confirmed that the elastic-plastic fracture analysis is more applicable for relatively low nil-ductility reference temperatures. It is also found that the results obtained by the XFEM are in good agreement with those obtained by the traditional K-T method in case of brittle initiation. Then the thickness effects of inlet pipe on the structural integrity are emphatically analyzed. Also, the effect of crack sizes on the bearing capacity of the nozzle region is demonstrated by crack propagation paths and damage degrees. To avoid brittle fracture, the allowable inlet pipe thicknesses corresponding to various crack sizes in a wide range of reference temperatures are obtained. The proposed method has a good ability to predict the integrity of the RPV structure through the analysis, comparison and mutual verification of different finite element meshes.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
