Thermo‐mechanical properties of jute/bamboo/polyethylene hybrid composites: The combined effects of silane coupling agent and copolymer

Abstract

AbstractThe effects of 3‐aminopropyl triethoxysilane (APTS) coupling agent and poly(ethylene‐co‐glycidyl methacrylate) (EGMA) copolymer on thermal, mechanical, and morphological properties of hybrid composites were investigated. There were a range of methods used to fabricate hybrid composites that included, untreated jute and bamboo fiber, APTS treated jute and bamboo fiber, and EGMA and low‐density polyethylene (LDPE). The hybrid composites were characterized using Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). In addition, tensile strength, tensile modulus, surface morphology, and water absorption tests were also reported. The IR spectra of treated jute‐bamboo hybrid composite revealed effective removal of OH groups from cellulose fiber using APTS. Treated jute‐bamboo/polyethylene composite (TJBC) and treated jute‐bamboo/EGMA/polyethylene composite (TJBEC) demonstrate 3.8 times and 3.7 times higher activation energy, respectively. High activation energy implied that APTS coupling effect is dominant compared with EGMA copolymer. A marginal decrease in the crystallinity index (15.9%) was found in case of TJBC. The tensile strength and Young's modulus of the treated hybrid composites exceeded 150% and 330%, respectively. Low water absorption rate in the treated hybrid composites was also observed. Based on the routes chosen to treat the hybrid composites along with the outcomes of the tests conducted on these suitable for the nonstructural application, such as, packaging, site hoarding, furniture, industrial shelving, and lining for truck/van cargoes.