Abstract

The effects on thermal and electrical properties of adding small amounts of TiO2 nanoinclusions to bulk Ba8Ga16Ge30 clathrate have been investigated. The thermal properties were analysed using the transient plane source technique and the analysis showed a significant decrease in thermal conductivity as the volume fraction of TiO2 increased from 0 vol. % to 1.2 vol. %. The introduction of TiO2 nanoparticles caused a shift in the peak value of the Seebeck coefficient towards lower temperatures. The maximum value of the Seebeck coefficient was, however, only little affected. The introduction of TiO2 nanoparticles into the bulk Ba8Ga16Ge30 resulted in an increased electrical resistivity of the sample, thus simultaneously reducing the charge carrier contribution to the thermal conductivity, partly explaining the decrease in total thermal conductivity. Due to the large increase in resistivity of the samples, ZT was only somewhat improved for the material with 0.4 vol. % TiO2 while the ZT values of the other materials were lower than for the reference Ba8Ga16Ge30 material without TiO2 nanoparticles. The combined results are consistent with a scenario where the nanoparticle introduction causes a light doping of the semiconductor matrix and an increased concentration of phonon scattering centres.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.