Abstract
The solar-to-fuel energy conversion efficiency () of the MgxFe3-xO4 (x = 0.2-1.0) based CO2 splitting (CDS) cycle is estimated at steady reduction () and oxidation temperatures () equal to 1673 K and 1273 K, respectively. The efficiency analysis is performed using the experimental results reported in the sol-gel-derived MgxFe3-xO4 based CDS cycle. The redox nonstoichiometry allied with the MgxFe3-xO4 during the reduction () and oxidation steps () is determined based on the experimentally obtained results. Efficiency analysis is conducted by considering the heat energy required to heat inert sweep gas and CO2. Heat penalty allied with the separation of the inert sweep gas from O2 and CO2 from CO is also considered. The solid-to-solid heat recovery effectiveness () is assumed to be zero, whereas the gas-to-gas heat recovery effectiveness () kept steady at 0.5. The release of a high amount of O2 and the production of an elevated CO level is responsible for the rise in the energy penalty associated with both separators. The obtained results also indicate that the total thermal energy required () to drive the cycle depends heavily on the sensible heat required () for raising the temperature of MgxFe3-xO4 from to . The obtained results also show that depends heavily on the amount of CO produced and hence recorded to be the highest (4.3%) in the case of MgFe2O4.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.