Abstract
Effects of two-step hot-pressing on microstructure, thermal conductivity and flexural strength of silicon carbide (SiC) ceramics were investigated. A novel combination of aluminium nitride (AlN), La2O3 and LaF3 was employed as sinter additives in this study. SiC ceramics prepared through both one-step (OS samples) and two-step (TS samples) hot-pressing method exhibited high relative densities. Compared with OS samples, the TS samples yielded finer microstructures with both higher thermal conductivities and flexural strengths. Impedance spectroscopy analysis was employed to reinforce the investigation on thermal conductivity variations in different samples. According to the analysis results, TS samples exhibited higher fitting grain and grain boundary resistances, which stood for a lower concentration of vacancies, indicating that two-step hot-pressing is more beneficial to the elimination of defects and improvement of thermal conductivity in SiC ceramics. On the other hand, TS samples were strengthened by a combined effect of finer microstructure and formation of SiC-AlN solid solution, thereby obtained higher flexural strengths. Hence, the present study suggests that two-step hot-pressing is more favorable to the improvement of both thermal conductivity and flexural strength of SiC ceramics with AlN-La2O3-LaF3 additive combinations.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
