Abstract
Bagasse fibers reinforced poly(vinyl alcohol) (PVA) composite films were successfully prepared by solution casting method. To enhance the dispersing effect of the fillers, alkali treatment of the plant fibers was adopted before the fabrication of composites. The structure and properties of the resulting composites were characterized by scanning electron microscopy (SEM), X-ray diffraction, differential scanning calorimetry, mechanical tests, water uptake and thermal stability in detail. The results showed that bagasse fibers after surface modification exhibited good compatibility with PVA matrix. The increased polarity as well as the roughness would be beneficial to the interaction and mechanical interlocking between the fiber and matrix. Acting as the heterogeneous nucleation agents, the fibers could enhance the degree of crystallization and decrease the supercooling degrees of PVA matrix. The fibers exhibited dramatically reinforcing effect in the matrix, and with the increase of fiber, the Young’s modulus and tensile yield stress increased. The Young’s modulus and tensile yield stress of composites with 8% filler would be 3 and 2 times compared with neat PVA films. The thermal stability decreased a little and the water uptake increased with the increase of filler content. These composite films would find wide applications in green packaging areas for their fine mechanical and thermal properties.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
