Abstract
In this article, two different types of spacer cations, 1,4‐butanediamonium (BDA2+) and 2‐phenylethylammonium (PEA+) are co‐used to prepare the perovskite precursor solutions with the formula of (BDA)1‐ a(PEA2)aMA4Pb5X16. By simply mixing the two spacer cations, the self‐assembled polycrystalline films of (BDA)0.8(PEA2)0.2MA4Pb5X16 are obtained, and BDA2+ is located in the crystal grains and PEA+ is distributed on the surface. The films display a small exciton binding energy, uniformly distributed quantum wells and improved carrier transport. Besides, utilizing mixed spacer cations also induces better crystallinity and vertical orientation of 2D perovskite (BDA)0.8(PEA2)0.2MA4Pb5X16 films. Thus, a power conversion efficiency (PCE) of 17.21% is achieved in the optimized perovskite solar cells with the device structure of ITO/PEDOT:PSS/Perovskite/PCBM/BCP/Ag. In addition, the complementary humidity and thermal stability are obtained, which are ascribed to the enhanced interlayer interaction by BDA2+ and improved moisture resistance by the hydrophobic group of PEA+. The encapsulated devices are retained over 95% or 75% of the initial efficiency after storing 500 h in ambient air under 40 ± 5% relative humidity or 100 h in nitrogen at 60 °C.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
