Abstract
The theory of the concave grating has been examined in considerable detail by methods of geometrical optics. The results derived by means of geometrical optics were checked by comparing them with those based on physical optics in special cases. The conditions for image formation and aberrations in the image may be expressed by equations somewhat different from those given by Beutler which are shown to be in error. The astigmatism and other aberrations are treated with respect to finite length of slit illumination, finite grating size and deviations of the optical components from the Rowland plane but still lying on the Rowland cylinder. Within certain limitations, it is shown that the aberrations present in an off-plane Eagle mounting may be corrected by a very small rotation of the slit in a plane perpendicular to the optic axis. The optimum width of the grating, instrumental line half-width, and resolving power of the grating are also discussed. Finally, the Beutler treatment of the concave grating is examined in detail and the important errors are pointed out.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.