The use of nonlinear guided-wave features for detection and assessment of intermetallic compounds within dissimilar joints – an experimental investigation

Abstract

Abstract Welding dissimilar materials is widely employed in industrial construction and manufacturing to enhance cost-effectiveness and performance, often utilizing non-fusion methods like solid-state and high-energy beam welding. However, a significant challenge is the formation of intermetallic compounds (IMCs) at the joint interface, which can weaken the bond and increase brittleness, leading to hidden internal cracks. Nonlinear ultrasound detection methods are employed as advanced, non-destructive testing techniques for early damage inspection in various materials. This research investigates the assessment of the thickness of the intermetallic layer within dissimilar joints using non-linear ultrasound-wave features. Numerical and experimental investigations were performed using four friction stir welding (FSW) lap joints, between AA5052-H32 aluminum and ASTM 516-70 steel, with various intermetallic thicknesses. The methodology involved examining the generation of second-order harmonic frequency by exciting Lamb waves (LW) at specific frequencies. To determine the necessary LWs' excitation frequency, synchronism, and non-zero power flux conditions were employed. The collected signals were measured and analyzed in the time and frequency domains to understand the behavior of the non-linear parameter β′ with the thickness of the intermetallic layer. The results show that β′ changes in a linear manner with the thickness of the intermetallic compound layer (several micrometers in thickness). This provides strong evidence that nonlinear LW features are sensitive to microstructural variations in the FSW joints, which enables them to effectively evaluate their strength.