The testing of disinfectants

Abstract

Although all disinfectant tests have the same final purpose, namely measuring the antimicrobial activity of a chemical substance or preparation, a large number of testing methods has been described. They are subdivided into suspension tests, carrier and surface disinfection tests and other practice-mimicking tests. The suspension tests comprise qualitative and quantitative suspension tests, and, as derived tests, the determination of the phenol coefficient and capacity tests. There is an essential difference between a carrier test and a surface disinfectant test: in the former case the carrier is submerged in the disinfectant solution during the whole exposure time, whereas in the latter case the disinfectant is applied on the carrier for the application time and thereafter the carrier is drying during the exposure. The basic principle now widely accepted is that the antimicrobial efficiency of a disinfectant is examined at three stages of testing. The first stage concerns laboratory tests in which it is verified whether a chemical compound or a preparation possesses antimicrobial activity. For these preliminary screening tests, suspension tests are considered. In the second stage of tests, disinfection procedures and not disinfectants are examined. It is determined under which conditions and at which use-dilution for a given application the preparation is active: the tests simulate real-life situations; such tests are carrier tests for the disinfection of materials by submersion and surface disinfection tests. The last stage takes place in the field, and comprises the in-loco or in-situ tests with as variants the in-use tests, which examine whether, after a normal period of use, germs are still killed by the disinfectant solution. It is the task of the European and international standardization organisations to develop new standards and to elaborate tests, which predict the effectiveness of a preparation in practice under variable circumstances.