The Stability of Dams with Different Stoping Elevations in the Tongling Valley-Type Tailings Impoundment: A Case Study in Yunnan China

Abstract

Significant interest has been focused on recovery rates, recovery options, and recovery utilization when tailings impoundments are re-mined. However, the stability of the tailings dams during the recovery process is also a severe issue. Based on engineering geological surveys and laboratory tests, the evolution of the Tongling tailings impoundment’s instability characteristics under different recovery heights and diverse working conditions was analyzed by numerical simulation. Firstly, with the help of 2D software, the position of the tailings dam infiltration line and the alteration of the dam safety factor during the stoping process were calculated. Secondly, 3Dmine (2017) software was used to create the 3D surface structure of the tailings impoundment, and then a 3D numerical analysis model was established by means of Midas GTS NX software. The numerical simulation of seepage and stress analyses were conducted based on the model. Consequently, the evolution of the stability characteristics of tailings dam under different operating conditions was calculated. The research demonstrates that the dry beach length of the tailings pond gradually reduces with a decrease in the extraction height, resulting in a lower infiltration line. Under flood conditions, the saturation line has partial overflow due to the poor seepage discharge capacity of the dam. The total displacement of the dam body is inversely proportional to the retrieval height. The more extreme the analyzed working conditions, the more the safety factor will be reduced. Additionally, the plastic variation area of the dam body will be more comprehensive, which will increase the risk of a dam collapse.