The reliability of CPTu and DMT for the mechanical characterisation of soft tailings

Abstract

Nowadays, the stability and the safe cover and closure of soft tailings has become one of the most challenging topics in geotechnical and environmental engineering. For appropriate analysis and modelling, geotechnical properties of tailings should be well defined. Due to low strength, viscous nature and poor trafficability, as well as due to the specific geometrical properties of fine particles and pore water chemistry in tailings, different test methods and their modification and improvements must be used for valid and reliable characterisation of tailings. This paper analyses and compares the results of different field test methods, piezocone penetration test (CPTu), flat dilatometer test (DMT) and field vane test (FVT), performed on the red gypsum sludge and complementary laboratory tests. CPTu and DMT measurements were evaluated using procedures developed for soils and the obtained mechanical properties were compared with those measured in the laboratory. The significant distinctions between different test methods and different empirical correlations were analysed taking into account differences in index properties of soils and the red gypsum sludge. Based on analysis, some modifications of conventional empirical correlations were proposed for field tests results interpretation and sludge characterisation. The obtained data also show the advantages and limitations of some conventional methods and prove the need for further development in that field of geotechnical investigation.