Abstract

The reduction behaviour of 3% cerium doped (Ce-Fe2O3) and undoped iron oxide (Fe2O3) by hydrogen in nitrogen (10%,v/v) and carbon monoxide in nitrogen (10%,v/v) atmospheres have been investigate by temperature programmed reduction (TPR). The phases formed of partially and completely reduced samples were characterized by X-ray diffraction spectroscopy (XRD). TPR results indicate that the reduction of Ce doped and undoped iron oxide in both reductants proceed in three steps reduction (Fe2O3 → Fe3O4 → FeO → Fe) with Fe3O4 and FeO were the intermediate. TPR results also suggested that by adding Ce metal into iron oxide the reduction to metallic Fe by using both reductant gaseous give better reducibility compare to the undoped Fe2O3. The reduction process of Ce and undoped Fe2O3 become faster when CO was used as a reductant instead of H2. Furthermore, in CO atmosphere, Ce-Fe2O3 give complete reduction to metallic iron at 700 0C which about 200 0C temperature lower than other samples. Meanwhile, XRD analysis indicated that Ce doped iron oxide composed better crystallite phases of Fe2O3 with higher intensity and a small amount of FeCe2O4.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.