Abstract

The advanced lithium-ion batteries that can tolerate zero-volt storage (ZVS) are in high demand for implantable medical devices and spacecraft. However, ZVS can raise the anode potential, leading to Cu current collector dissolution and solid-electrolyte interphase (SEI) degradation, especially at 37°C. In this contribution, by quantitatively regulating the dosage of Li6CoO4 cathode additives, controllable potential of the working anode under abusive-discharge conditions is demonstrated. The addition of Li6CoO4 keeps zero-crossing potential (ZCP) and the potential of ZVS below 2.0 V (vs Li/Li+) for LiCoO2|mesocarbon microbead cells at 37°C. The capacity retention ratio (CRR) increases from 69.1% and 35.9% to 98.6% and 90.8% after 10 and 20 days of ZVS, respectively. The Cu dissolution and SEI degradation are effectively suppressed, while the over-lithiated cathode exhibits high reversible capacity after ZVS. The limiting conditions of long-term ZVS are further explored and a corresponding guide map is designed. When quantitatively regulating ZCP and the potential in ZVS, Cu dissolution, SEI degradation, and irreversible conversion of the cathode constitute the limiting conditions. This contribution designs the most reasonable potential range for ZVS protection at 37°C, and realizes the best CRR record through precise potential regulation for the first time.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.