Abstract
To alleviate the environmental pollution caused by the stockpile of mining-based, such as coal-based solid waste, mining solid waste-based CaO-MgO-Al2O3-SiO2 (CMAS) glass-ceramics with a diopside phase as the main crystalline phase was developed by one-step sintering method, and the effect of different solid waste content on the network structure and properties were investigated. The results show that, with the diversification of solid waste content, the crystallization temperature (Tp), the amount of Fe3+ concentration, and diopside crystalline, the main structure of glass Q2 changed also. Accordingly, significant changes have occurred in properties such as the bending strength, Vickers hardness, and density. Optimizing the raw material ratio, crystallization mechanism, a mining solid waste-based glass-ceramic with unique network structure is well developed and the bending strength, Vickers hardness, fracture toughness, and density reaches maximum values of 175.19 MPa, 10.47 GPa, 2.03 MPa⋅m1/2, and 3.00 g/cm3, respectively. The findings contribute significantly to the development of durable and reliable materials for the utilization of mining solid waste resources.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
