Abstract
Digital macro photography and settling tests were carried out to investigate the morphological and settling characteristics of ANAMMOX granules in a high-rate reactor. The ANAMMOX granules could be divided into settling and floating granules. The settling granules with an average diameter of 2.96±0.99 mm were smaller than the floating granules with an average diameter of 4.58±1.22 mm. A settling model was established and validated to correlate the settling velocity with the density (ρG), mass shape factor (ψmass), shape-correction factor (characterized by sphericity (Φ(')) or roundness (ξ)) and projected area equivalent sphere diameter (dP) of ANAMMOX granules. The sphericity was more suitable than the roundness for describing the settling behavior. The sensitivity of four parameters was in the order of ρG,ψmass, dP and Φ('). Based on the settling model, ANAMMOX granules with diameter of 1.75-4.00 mm were supposed to be optimal for the ANAMMOX process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
