Abstract
Wide ranging mechanical properties — elasticity, plasticity, fracture, and creep — most relevant to the mechanical reliability of perovskite solar cells (PSCs) are systematically investigated. High quality bulk single-crystals of the commonly studied metal-halide perovskites (MHPs) relevant to PSCs are fabricated and studied: CH3NH3PbBr3 (MAPbBr3) and CH3NH3PbI3 (MAPbI3). The first direct measurement of MHP Young's modulus (E) using uniaxial compression reveals E<100> of 13.1 ± 1.3 and 10.6 ± 1.0 GPa for MAPbBr3 and MAPbI3, respectively. The Vickers micro-hardness H(100) of MAPbBr3 and MAPbI3 is 0.54 ± 0.02 GPa and 0.76 ± 0.05 GPa, respectively. The Vickers micro-indentation fracture toughness KIC of MAPbBr3 and MAPbI3 is estimated at 0.20 ± 0.03 MPa⋅m0.5 and 0.18 ± 0.03 MPa⋅m0.5, respectively. The stress-exponent, n, extracted from nanoindentation creep data is ∼8 and ∼10 for MAPbBr3 and MAPbI3, respectively. The trends in these properties are discussed. These properties are best estimates and are recommended for use in future mechanical behavior and reliability analyses of MHPs and PSCs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
