The liquid junction cell based on the nanostructured TiO 2 electrode sensitized with zinc tetrasulfonated phthalocyanine

Abstract

High-surface-area TiO 2 film has been deposited on an indium tin oxide (ITO) conducting glass substrate from colloidal suspension. Atomic force microscope and scanning electron microscope analyses show that the TiO 2 electrode is made up of nanometer-sized and interconnected TiO 2 particles and pores. The specific surface area of the TiO 2 electrode is determined by the size of particles and the thickness of the film and can be measured to be 270 by the absorption spectrum study of the TiO 2 electrode sensitized with zinc tetrasulfonated phthalocyanine (ZnTsPc). A liquid junction cell based on the ZnTsPc/nanostructured TiO 2 electrode has been fabricated and harvests 20% of the incident solar energy flux. Under monochromatic illumination at λ = 700 nm, the incident-photon-to-current conversion efficiency (IPCE) is about 2.1% and the quantum efficiency, considering the actual absorption of the incident light, is 7%. The conversion efficiency reaches 1.7% under an illumination of 35 mW cm −2, which presents one of the highest values reported for phthalocyanine photovoltaic devices. The pre-deposition of the conducting TiO 2 thin layer with the closely packed structure gives rise to the improvement in photoelectric performance of the solar cell, which is due to the formation of the liquid junction in the interface between the TiO 2 electrode and electrolyte.