The lip motion trajectory of eccentric oil seal considering material viscoelasticity

Abstract

PurposeThis paper aims to study the motion trajectory of the oil seal for shaft in eccentric state and derive equation of lip motion trajectory.Design/methodology/approachThis paper analyzes the force during the motion of the eccentric lip by considering the material viscoelasticity, and a cam-plate mechanism is established as an equivalent model for the motion between the shaft and the lip; according to this, the equation of lip motion trajectory is derived.FindingsThe trajectory of the lip lags that of the shaft in the eccentric state because the viscoelasticity-affected lip recovery velocity is lower than the shaft recovery speed. The lip trajectory enters the lag phase earlier and the lag phase’s duration is longer with the increase of the eccentricity and rotational speed, because the deviation of the recovery velocities between the lip and the shaft will be exacerbated.Originality/valueInnovatively, by considering the viscoelasticity of the material, the cam-plate mechanism is used to equivalent the motion of the shaft-lip to derive the equation for the radial motion trajectory of the eccentric lip. The regularity of lip motion is the key to determining the performance of oil seals, and the eccentric lip trajectory research method revealed in this paper provides a research basis for the performance research and optimization of eccentric oil seals.Peer reviewThe peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-06-2023-0161/