Abstract
AbstractReducing liquid surface tension is widely used to increase the efficiency of the centrifugal dehydration in textile wet processing. However, increasing the dehydration efficiency by decreasing fabric surface energy is seldom studied. In this work, the impact of in situ fabric surface energy on residual moisture content (RMC) of fabrics in the dehydration processes was investigated. Different types of fluorocarbon surfactants including cationic, anionic, nonionic and amphoteric were adopted as additives in this study. The liquid surface tension and RMC were efficiently decreased when fluorocarbon surfactants were used. Notably, a cationic fluorocarbon surfactant displays similar surface tension but distinct dehydration efficiency. The in situ fabric surface energy was evaluated by measuring the n‐octane contact angle on the cotton fabric surface under the surfactant solution using the captive bubble method. It was found that the cationic fluorocarbon surfactant system gave the lowest fabric surface energy, which was probably because cationic fluorocarbon surfactants are easier to adsorb onto the surface of cotton fabric to form a fluorocarbon layer. The chemical composition (19F, 12C and 16O) analysis of the cotton fabric surface by X‐ray photoelectron spectroscopy confirms the hypothesis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
