Abstract
The Ti-Al-Si coatings were prepared on TiBw/Ti6Al4V composites by a two-step method comprising hot dip and heat treatment processes to enhance the hot corrosion resistance. Results show that Ti-Al-3Si (wt%) and Ti-Al-20Si (wt%) coatings were mainly composed of the Ti(Al,Si)3 and Ti3AlSi5 phase, respectively. Both of the coatings can protect the substrate against the deposited NaCl, 25 wt%NaCl+ 75 wt%Na2SO4, and Na2SO4 salts. In particular, the coatings exhibited superior hot corrosion resistance in the deposited Na2SO4 salts, which is attributed to the formation of dense and continuous Al2O3 oxide scales and the slow dissolution process of sulfate during the hot corrosion process. Moreover, the Ti-Al-Si coatings exhibited serious external oxidation when hot corroded in the deposited 25 wt% NaCl+ 75 wt%Na2SO4 and Na2SO4 salts, in which more corrosion products and pores were formed due to the autocatalytic reaction processes. Since the deposited NaCl salt would rapidly dissolve the oxide scale and destroy its compactness and continuity, which presented a more serious hot corrosion effect.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
