The high-temperature mechanical properties of HS110S steel and its corrosion behaviors in harsh downhole environment

Abstract

PurposeThis paper aims to investigate the high-temperature mechanical properties of HS110S steel and its corrosion behaviors in harsh downhole environment.Design/methodology/approachIn this work, mechanical property measurements were carried out from 25°C to 350°C and the scanning electron microscopy was used to observe the fracture morphology. The weight-loss measurements and surface characterization were used to evaluate the corrosion resistance of HS110S steel in harsh downhole environment.FindingsResults show that the yield strength and tensile strength of HS110S steel at 350 °C are 779 and 861 MPa, respectively. Compared with room temperature, the reduction rate values are both less than 20%. At the high-temperature corrosion environment (350 °C), the static and dynamic corrosion rates are 0.9668 and 1.9236 mm/a, respectively. The generated corrosion products are mainly composed of FeSx, FeCO3 and Fe3O4. Therefore, the HS110S steel applied under such conditions needs to take suitable protective measures.Originality/valueIn general, the HS110 steel has widely used in conventional development conditions (e.g. low H2S or high CO2 environments). However, to the best of the authors’ knowledge, no studies have reported on its application at more than 250°C. Therefore, this work can be a reference to the application of HS110S steel in high-temperature corrosion conditions.