Abstract
The purpose of this research was to obtain porous, high‐quality cathodes for solid oxide fuel cells in both planar and tubular shapes. To accomplish this, cathodic electrophoretic deposition of the LaMnO3 powder (synthesized by the modified sol–gel method proposed by Pechini) was performed. The optimal sintering temperatures were 1200°C and 1300°C for the tubular and planar configurations, respectively. Single‐phase deposits with about 40% porosity were obtained in both configurations. The cathode quality was confirmed by depositing an electrolyte layer of YSZ. After the cosintering of both layers, an extremely dense electrolyte layer was obtained, and the cathode layer retained its high porosity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Applied Ceramic Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.