Abstract
Kenaf is one of the important plants cultivated for natural fibres globally and is regarded as an industrial crop in Malaysia for various applications. This study was conducted to determine the effects of orientation on the tensile and flexural strengths, Charpy impact test, and morphological properties of kenaf fibre-reinforced poly vinyl butyral (PVB) composites. Laminates of 40% fibre weight fraction were manufactured using the hot press manufacturing technique at 0˚/90˚ and 45˚/−45˚ orientations, and eight specimens were prepared for each test. The mechanical properties of the composites were variably affected by the fibre orientation angle. The results showed that the composites at 0o/90o had the highest tensile strength, flexural strength, and flexural modulus, while the elongation at break was almost the same. Additionally, tests were carried out on the composites to determine their impact energy and impact strength. The results revealed that impact properties were affected in markedly different ways by different orientations. The composite at 45˚/−45˚ offered better impact properties than the composites at 0˚/90˚. In addition, scanning electron microscopy for impact specimens was employed to demonstrate the different failures in the fracture surfaces.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
