The effects of fibre reinforcement and gold plating on the flexural and tensile strength of PGA/PLA copolymer materials in vitro

Abstract

Changes in the flexural and/or tensile strength of plates and rods made of PGA/PLA copolymer submerged in water for a period of 4 wk were investigated. During this time, the effects of PGA/PLA fibre self-reinforcement, carbon fibre reinforcement and gold plating on tensile and/or flexural strength were examined. The results were used for evaluation of the surgical applications of PGA/PLA copolymer and its composites. The initial tensile strength of non-reinforced material was 45 Mpa and its flexural strength was 150 MPa: the flexural strength of self-reinforced material was 265 MPa. The tensile strength of carbon fibre reinforced material was 90 MPa and its flexural strength 190 MPa. The initial strengths of plated end unplated samples were the same but plating delayed the loss of the mechanical strength of carbon fibre reinforced samples. After 4 wk the flexural strength of self-reinforced and carbon fibre reinforced samples was decreased to the level of cancellous bone (10–20 MPa) while the flexural strength of non-reinforced samples was below that level (≲ 5 MPa). The results suggested that self-reinforced PGA/PLA composites may be used for the treatment of fractures in cancellous bone. Positive animal experiments led to clinical studies in vivo. These studies showed that there was no difference in outcome between 2 groups of patients with displaced fractures of the ankle treated with metallic implants or PGA/PLA fibre self-reinforced implants, respectively. Self-reinforced biodegradable implants are now used routinely in Helsinki University Central Hospital.