Abstract
The aim of this study was to investigate the effect of temperature on the tribological properties of Palm Kernel Activated Carbon-Epoxy (PKAC-E) composite. All specimens were formed into 10mm diameter pins of 30mm length, using a hot compaction technique. Tribological testing was carried out using a pin-on-disc tribometer in dry sliding conditions by applying temperatures in the range of 27oC to 150oC, at constant sliding speed, applied load, and sliding distance. The results showed that both coefficients of friction (COF) and wear rate of the composite increased with operating temperatures. Abrasive wear and crack formation that would induce delamination wear were identified as the predominant wear mechanisms.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.