Abstract

AbstractThe effect of heat sealing temperature on the mechanical properties and morphology of OPP/CPP laminate films was investigated. The laminated films were placed in an impulse type heat sealing machine with both CPP sides facing each other. The temperatures investigated ranged from 100 to 250°C. T‐peel and tensile tests in combination with SEM were used to characterize the heat seals. A minimum seal initiation temperature of 120°C was identified for OPP/CPP laminate heat sealing. Peel strength increased sharply from zero at 110°C to maximum at 120°C, after which a gradual decrease was observed. Tensile strength initially increased until 120°C, after which it gradually decreased until 170°C and assumed a constant value beyond that. The initial rise has been associated to cold crystallization, while the reduction between 120°C and 170°C was due to relaxation in molecular orientation. Beyond 170°C, all the orientation in the laminate has been lost so orientation effects are nullified. Morphological studies with SEM revealed that seals were partially formed at lower temperatures, while the laminates were totally fused together at high temperatures, with intermediate temperatures showing properties that lie in between. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 753–760, 2005

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.