Abstract
Good airplane joining supports aircraft strength. The general joining process is using rivet as joining method. The parameter that affects the strength during the riveting process is the duration of the rivet head formation. The purpose was to determine the effect of the duration of rivet head formation on the quality of the joint. The research was carried out with the help of homemade tools, to ensure data consistency. The selected riveting duration is 3, 4, 5, 6 seconds. After connection, each connection was tested for strength through tensile testing and macro photo images from the joining. Results show that the 5-second duration provides the best connection with the tensile test results of 165 MPa. Based on the macro photo image, the 5 second rivet process produces the best connection because it produces the biggest rivet body so that it provides the greatest strength compared to the others.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
