Abstract
Wood densification is a technique to increase the quality of low-density wood such as Jabon wood. The variation of densification time of Jabon wood will affect the quality of the wood. This study aimed to determine the effect of densification time on the physical and mechanical properties of Jabon wood. Jabon wood was densification using a hot press at 5, 10, 15, and 20 minutes at a temperature of 180 °C and a densification target of 20%. This densification wood will be compared to control wood. The results showed that the density value increased from 0.37 g/cm3 to 0.39-0.42 g/cm3, and the moisture content value was reduced to 11.57-15.12 %. There was an increase in value modulus of elasticity, modulus of rupture, and compression parallel to the grain by 31.55-48.86%, 6.65-35.33%, and 42.68-55.26%, respectively. The optimum value of this study resulted in a densification time of 10 minutes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.