Abstract
The effect of cryogenic treatment on the wear resistance of aluminium alloy LM 25, LM25+5 % fly ash and LM25+10% fly ash composites, which are synthesized by squeeze casting method, was investigated. The impact of the parameters on the wear resistance was studied under two different cryogenic soaking periods [0hrs (untreated), 12hrs and 24 hrs.] and three different load and sliding velocities with the help of pin-on-disc test rig. The wear tests were performed according to Taguchi’s approach. The percentage contribution of the cryogenic soaking period was determined by means of analysis of variance. The load was found to be more significant than cryogenic soaking period and velocity on wear loss of the composites. Regression model was generated to envisage the wear loss.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Engineering and Advanced Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
