The effect of cross links on rotational stiffness of scoliosis constructs

Abstract

The purpose of this study is to investigate what effect cross links have on scoliosis constructs and whether cross links may be used instead of pedicle screws at the apex of the deformity The rotational stiffness of six different construct designs was investigated on scoliotic sawbone models with zero, one or two cross links. In three of the constructs the screws at the apex were removed. Testing was performed to an average torque of 3Nm and ration was detected using electromagnetic motion tracking system. The stiffness in axial rotation of all constructs increased with the number of cross links, however the difference was not statistically significant. In constructs with apical screws the stiffness increased by 3.01% and 12.9% for one and two cross links respectively. In constructs without apical screws the increase was 1.64% and 14.3% for one and two cross links respectively. The total stiffness of the construct increased with the addition of apical screws by 20%, 21.7% and 18.8% for zero, one and two cross links respectively. This increase was statistically significant using a paired t-test (p= 0.01142). On the basis of these results we conclude that the use of cross links in scoliosis correction surgery is not necessary. Pedicle screws positioned at the apex of the scoliosis curve statistically increase the stiffness in axial rotation and are therefore necessary to promote an environment suitable for bony fusion.