Abstract
In this study, the effects of cutting tool coating material and cutting speed on cutting forces and surface roughness are investigated. For this purpose, nickel based super alloy Inconel 718 is machined at dry cutting conditions with three different cemented carbide tools in CNC lathe. Metal removing process is carried out for five different cutting speeds (15, 30, 45, 60, 75 m/min.) while 2 mm depth of cut and 0.20 mm/rev feed rate are to be constant. Main cutting force, F c is considered to be cutting force as a criterion. In the experiments, depending on the tool coating material, lowest main cutting force is found to be 506 N at 75 m/min with multicoated cemented carbide insert whose top layer is coated by Al 2O 3. Lowest average surface roughness (0.806 μm) is obtained at the cutting speed of 15 m/min with single coated (TiN) cemented carbide inserts.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
