The De‐Shielding Effect of Water‐Cyclohexane Biphasic Cosolvent on Hemicellulose Fractionation of Biomass

Development of a universal method for high yield of furfural and hydrogen from raw lignocellulosic biomass

Synthesis of branched long-chain alkanes from renewable biomass has attracted intensive interest in recent years, but the feedstock for this synthesis is restricted to platform chemicals. Here, we develop an effective and energy-efficient process to convert raw lignocellulosic biomass (e.g., corncob) into branched diesel-range alkanes through three tandem steps for the first time. Furfural and isopropyl levulinate (LA ester) were prepared from hemicellulose and cellulose fractions of corncob in toluene/water biphasic system with added isopropanol, which was followed by double aldol condensation of furfural with LA ester into C15 oxygenates and the final hydrodeoxygenation of C15 oxygenates into branched long-chain alkanes. The core point of this tandem process is the addition of isopropanol in the first step, which enables the spontaneous transfer of levulinic acid (LA) into the toluene phase in the form of LA ester through esterification, resulting in LA ester co-existing with furfural in the same phase, which is the basis for double aldol condensation in the toluene phase. Moreover, the acidic aqueous phase and toluene can be reused and the residues, including lignin and humins in aqueous phase, can be separated and carbonized to porous carbon materials.

Combined treatments for producing 5-hydroxymethylfurfural (HMF) from lignocellulosic biomass

Wild mushroom's cultivation has gained significant attention worldwide because of their high nutritional value as they are rich source of protein and do contain various macro and minor nutrient for balanced diet. Besides this mushrooms are also recognized as nutraceutical foods, and draw considerable attention because of their organoleptic merit, medicinal properties, and economic significance. As mushrooms are saprophytic fungi, their presence is cosmopolitan and easily thrive on lignocellulosic biomass. Wild mushrooms draw nutrients for their growth via degrading lignocellulosic components using lignocellulolytic enzymes produced by them. Raw lignocellulosic biomass such as cereal straw, bagasse, sawdust is not capable of providing all the nutrient necessary throughout the growth period of the wild mushroom however addition of the agro-industrial residue such as bran with raw lignocellulosic biomass can not only increased the yield and quality but efficient utilized the raw lignocellulosic biomass. That's why cultivation of wild mushroom using lignocellulosic biomass as substrate has dual benefit as wild mushroom cultivation help in solving lignocellulosic biomass-based waste management and lignocellulosic biomass enhanced the nutritional profile of the wild mushroom. This chapter discusses the nutritional profile of various wild mushroom species such as Pleurotus spp., Flammulina spp.,Agaricus spp.,Lentinus spp., etc. Further, the source, availability and composition of the different lignocellulosic biomass and their potential for wild mushroom cultivation has been explored in details. The qualitative variation among the different lignocellulosic and associated nutritional aspect of growing wild mushroom are core of this chapter. This chapter also highlighted the importance of the addition of agro-industrial based residue in raw and modified form in the enhancement of the yield and nutritional profile of wild mushroom.

Nitric oxide (*NO) has been proposed to play a relevant role in modulating oxidative reactions in lipophilic media like biomembranes and lipoproteins. Two factors that will regulate *NO reactivity in the lipid milieu are its diffusion and solubility, but there is no data concerning the actual diffusion (D) and partition coefficients (KP) of *NO in biologically relevant hydrophobic phases. Herein, a "equilibrium-shift" method was designed to directly determine the *NO and O2 partition coefficients in liposomes and low density lipoprotein (LDL) relative to water. It was found that *NO partitions 4.4- and 3.4-fold in liposomes and LDL, respectively, whereas O2 behaves similarly with values of 3.9 and 2.9, respectively. In addition, actual diffusion coefficients in these hydrophobic phases were determined using fluorescence quenching and found that *NO diffuses approximately 2 times slower than O2 in the core of LDL and 12 times slower than in buffer (DNOLDL=3.9 x 10(-6) cm2 s(-1),DO2LDL=7.0 x 10(-6) cm2 s(-1),DNObuffer=DO2buffer=4.5 x 10(-5) cm2 s(-1)). The influence of *NO and O2 partitioning and diffusion in membranes and lipoproteins on *NO reaction with lipid radicals and auto-oxidation is discussed. Particularly, the 3-4-fold increase in O2 and *NO concentration within biological hydrophobic phases provides quantitative support for the idea of an accelerated auto-oxidation of *NO in lipid-containing structures, turning them into sites of enhanced local production of oxidant and nitrosating species.

Using raw lignocellulosic biomass as feedstock for sustainable production of chemicals is of great significance. Herein, we report the direct catalytic conversion of raw woody biomass into two groups of chemicals over a carbon supported Ni-W2C catalyst. The carbohydrate fraction in the woody biomass, i.e., cellulose and hemicellulose, were converted to ethylene glycol and other diols with a total yield of up to 75.6% (based on the amount of cellulose & hemicellulose), while the lignin component was converted selectively into monophenols with a yield of 46.5% (based on lignin). It was found that the chemical compositions and structures of different sources of lignocellulose exerted notable influence on the catalytic activity. The employment of small molecule alcohol as a solvent could increase the yields of phenols due to the high solubilities of lignin and hydrogen. Remarkably, synergistic effect in Ni-W2C/AC existed not only in the conversion of carbohydrate fractions, but also in lignin component degradation. For this reason, the cheap Ni-W2C/AC exhibited competitive activity in comparison with noble metal catalysts for the degradation of the wood lignin. Furthermore, the catalyst could be reused at least three times without the loss of activity. The direct conversion of the untreated lignocellulose drives our technology nearer to large-scale application for cost-efficient production of chemicals from biomass.

The bi-functional Ni–W@C catalysts were prepared by one-pot reduction–carbonization method and used in hydrogenolysis of cellulose as well as raw lignocellulosic biomass to chemicals. The catalytic performance for cellulose conversion showed that it was more favorable for ethylene glycol (EG) production, obtaining the highest EG yield 60.1% over the Ni–W@C700 catalyst. The Ni–W@C bimetallic catalysts are systematically characterized with BET, XRD, Raman, XPS, TEM techniques and experiments to probe the active catalytic sites of the catalysts. The effects of calcination temperature of Ni–W catalysts, reaction time, temperature and H2 pressure on cellulose hydrogenolysis were investigated in detail. The Ni particles could lead to produce more W5+ active sites, which promotes the glucose retro-aldol condensation to break the target C–C bonds. Metallic Ni catalyzed C=O hydrogenation and C–C hydrogenolysis, which could also avoid the coke formation. The EG selectivity was dependent on the synergy of WOx and Ni metal sites. In addition, this synergistic effect between the metal and WOx could promote lignin component degradation in direct conversion of untreated raw lignocellulosic biomass, obtaining the propyl monophenolics including guaiacylpropane, syringylpropane and p-n-propylphenol with a total yield of 17.3 wt% besides EG.

Eco-friendly and rapid one-step fermentable sugar production from raw lignocellulosic biomass using enzyme mimicking nanomaterials: A novel cost-effective approach to biofuel production

Deep eutectic solvent for lignocellulosic biomass fractionation and the subsequent conversion to bio-based products – A review

Distribution of platelet glycoproteins and phosphoproteins in hydrophobic and hydrophilic phases in triton Triton-114 phase partition

The ability to predict the transport and transformations of contaminants within the subsurface is critical for decisions on virtually every waste disposal option facing the Department of Energy (DOE), from remediation technologies such as in situ bioremediation to evaluations of the safety of nuclear waste repositories. With this fact in mind, the DOE has recently sponsored a series of workshops on the development of a Strategic Simulation Plan on applications of high perform-ance computing to national problems of significance to the DOE. One of the areas selected for application was in the area of subsurface transport and environmental chemistry. Within the SSP on subsurface transport and environmental chemistry several areas were identified where applications of high performance computing could potentially significantly advance our knowledge of contaminant fate and transport. Within each of these areas molecular level simulations were specifically identified as a key capability necessary for the development of a fundamental mechanistic understanding of complex biogeochemical processes. This effort consists of a series of specific molecular level simulations and program development in four key areas of geochemistry/biogeochemistry (i.e., aqueous hydrolysis, redox chemistry, mineral surface interactions, and microbial surface properties). By addressing these four differ-ent, but computationally related, areas it becomes possible to assemble a team of investigators with the necessary expertise in high performance computing, molecular simulation, and geochemistry/biogeochemistry to make significant progress in each area. The specific targeted geochemical/biogeochemical issues include: Microbial surface mediated processes: the effects of lipopolysacchardies present on gram-negative bacteria. Environmental redox chemistry: Dechlorination pathways of carbon tetrachloride and other polychlorinated compounds in the subsurface. Mineral surface interactions: Describing surfaces at multiple scales with realistic surface functional groups Aqueous Hydrolysis Reactions and Solvation of Highly Charged Species: Understanding the formation of polymerized species and ore formation under extreme (Hanford Vadose Zone and geothermo) conditions. By understanding on a fundamental basis these key issues, it is anticipated that the impacts of this research will be extendable to a wide range of biogeochemical issues. Taken in total such an effort truly represents a “Grand Challenge” in molecular geochemistry and biogeochemistry.

44] Antioxidant radical-scavenging activity of carotenoids and retinoids compared to α-tocopherol

The high-volume synthesis of two-dimensional (2D) materials in the form of platelets is desirable for various applications. While water is considered an ideal dispersion medium, due to its abundance and low cost, the hydrophobicity of platelet surfaces has prohibited its widespread use. Here we exfoliate 2D materials directly in pure water without using any chemicals or surfactants. In order to exfoliate and disperse the materials in water, we elevate the temperature of the sonication bath, and introduce energy via the dissipation of sonic waves. Storage stability greater than one month is achieved through the maintenance of high temperatures, and through atomic and molecular level simulations, we further discover that good solubility in water is maintained due to the presence of platelet surface charges as a result of edge functionalization or intrinsic polarity. Finally, we demonstrate inkjet printing on hard and flexible substrates as a potential application of water-dispersed 2D materials.

Molecular Organization of the Tear Fluid Lipid Layer

A method to measure receptor binding of ligands with low affinity: Application to plasma proteins binding assay with hemopoietic cells