Abstract
TiAl inter-metallic compound is considered to be an effective material for high temperature structural materials. Since, this material is considered to be a creep brittle like material, it is necessary to construct the prediction law for the life of creep crack growth. The introduction of a fatigue pre-crack was found to be difficult due to material structure. Therefore, the validity of using a sharp-notched specimen (machined or EDM) instead of a fatigue pre-cracked specimen to perform creep crack growth rate test (CCGR test) has been proposed. In this paper, creep crack growth tests were conducted for this material using CT specimens with a sharp notch. On the basis of a thermally activated process, CCGR of TiAl inter-metallic compound with full lamellar microstructure was characterized in terms of temperature and stress component and Q ∗ parameter for this material is derived. Furthermore, the algorithm of predicting the life of creep crack growth based on the Q ∗ parameter was derived. This equation was found to well predict the life of creep crack growth.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Pressure Vessels and Piping
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
