The benefits and challenges associated with technologies in managing workplace health and safety

Construction safety management is at the construction site safe working environment security to ensure to control activities a method that can be used. Planning and design taken during the process results of the construction project when the protection is largely affected. Construction and demolition sites, labor protection, and health hazard the result is unique hazards and risks causing professional safety and health management protection of systems organizations and health hazards continue to detect and remove help, incident possibilities reduce, to regulations compliance and risk-reduction implement interventions. Construction industry sites employee health and safety very dangerous to work with one of the workplace environments. Manufacturing processes, labor intensive characteristics, and occupational accidents due to the construction industry the greater the risk, the greater it is scale of financial losses, and the worst the company results from reputation. Construction in the construction industry site security is very important this is an important requirement mostly on project sites is ignored. Correct without safety regulations, hazards of the construction industry and because of the dynamic environment, staff small and large are prone to accidents. Security management systematic risk management in detection, and with it related risks can also help control, at the same time this control activities of the construction site useful in aiding protection it promises to be. Safety management process roughly the following steps outlines: planning related to the workplace at the stage identity hazards and accident or to avoid property damage ensure construction safety appropriate restrictions for making and advance the determination of the step. Accidents possible actions early detection, safe practices followed and safe conditions whether maintained monitoring of verification work. Neighbors are public and private protection of assets at all levels of the organization effective communication implementation and promotion. Safe operating modes attractive to use regularly with incentive programs safety education and training providing. Constant professionalism health and safety compliance with regulations. PROMETHEEE is a priority for assessment enrichment Ranking system and its interactive help Descriptive complementary geometric analysis known as PROMETHEEE methods. In this, The PROMETHEEE method is the best solution from the analysis The shorter the distance and the longer the negative-ideal solution Determines the solution with the distance, but of these distances, The comparison was not considered significant. Alternative is Safety Commitment by Senior Management, Competency Profiles, Safety Climate, Project Management, Safety Requirements and Incentives, Safe Working Environment/ Conditions. Evaluation preference is Government building, Private building, Civil engineering, Industrial building. From the result it is seen that Government building is got the first rank where as is the Industrial building is having the lowest rank. Government building is ranked first and industrial building is ranked lowest.

Purpose The construction industry is considered worldwide to be a dangerous industry because of its high rate of fatal accidents and serious injuries. This study aims to find ways to improve this situation by focusing on how to improve competence on health and safety (H&S) among newly graduated construction engineers in Norway. Design/Methodology/Approach In Norway, the regional safety representatives (RSRs) are considered to be cornerstones in ensuring H&S in the construction industry. Information in this study was gathered by conducting semi-structured in-depth interviews with 15 RSRs. Findings The results show that RSRs believe that while construction engineers have sufficient theoretical competence on HS however, many seem to lack the practical competence needed to ensure and implement H&S measures. The informants underline the importance of work practice on construction sites as part of the education as key to improve H&S competence among graduates. Research Limitations/Implications Input on possible improvements is collected from only one group of stakeholders in the industry. Other stakeholders might have valuable input that should be considered before concluding what improvements in the education are most effective. Practical Implications The findings may help to decide upon and implement improvements in the education of construction engineers and, thus, contribute to a safer and healthier industry in the future. Originality/Value The stakeholder perspective of RSRs on education of construction engineers has not been considered in earlier research despite the fact that they represent vital competence on H&S in the construction industry. This study aims to fill some of this gap.

Safety in the construction industry has always been a major issue. Wherever reliable records are available, construction is found to be one of the most dangerous on safety and health criteria, particularly in developing countries. Though much improvement in construction safety has been achieved, the industry still continues to lag behind most other industries with regard to safety. In developing countries, safety rules usually do not exist; if any exist, the regulatory authority is usually very weak in implementing such rules effectively. Further, work hazards at the construction workplace are either not perceived at all, or perceived to be less dangerous than what they actually are. The safety climate of any organisation consists of employees' attitudes towards, and perceptions of, health and safety behaviour. Construction workers' attitudes towards safety are influenced by their perceptions of risk, management, safety rules and procedures. Although research into safety climate has continued for more than two decades, there is still no universally accepted theory of safety climate. Nevertheless, positive correlation exists between workers' safe behaviour and safety climate in construction site environments. Workers' attitudes and behaviours discernible in safety climate, could be regarded as the micro-elements of an organisation, which themselves are determined by macro-elements of safety management systems and practices. Thus, it could be argued that management safety systems and practices permeate down through the organisation to the workforce. Classic construction safety management functions (such as recruitment, training, supervision, etc.) are determined by different conceptions of the role and nature of management effectiveness. These conceptions are underpinned by related cultural values. Therefore, national culture can be a key characteristic that may manifest itself in varying approaches to the safe work behavior. Pakistan is a developing country that is currently enjoying a relatively strong growth in construction activities. Unfortunately, Pakistan's construction industry suffers from poor safety and health conditions. The framework of the existing occupational and health conditions is fragmented and inadequately enforced, making construction sites more hazardous. It may even be argued that relevant regulations are outdated and irrelevant in day-to-day construction operations. This thesis is broadly concerned with national culture and its influence on safety climate in the construction industry in Pakistan. More specifically, it investigates the safety perceptions, attitudes, and behaviour of Pakistani construction workers and management safety practices. It presents the empirical results of a number of questionnaire surveys administrated in Pakistan targeting construction workers, and managers with safety management responsibilities. Based upon the survey analysis results, this study demonstrates that the majority of Pakistani construction workers have a good degree of risk awareness and self-rated competence, and a relatively high degree of safety awareness. Further it was found, empirically, that overall workers' intentional behaviour seems to be best explained by workers' attitudes towards their own and managements' safety responsibilities, as well as their perception of the risk they are generally exposed to in their workplace environment. The study also showed that workers are more collective, feminist, believe in less power distance and opt for higher uncertainty avoidance in their attitudes. The analysis of the interrelationship between workers' behaviour and national culture revealed that the more workers working in a collective, feminist, and higher uncertainty avoidance environments, the more they are going to exhibit safer behaviour. The management safety practices survey analysis showed that managers' safety management preferences are being influenced by their cultural trends. Their safety related decisions, whether being developed in head office or on site, are influenced by their high collectivistic, feministic, power distance and uncertainty avoidance attitude. This study thus establishes a statistically significant positive relationship between the factors of workers' perceptions, attitudes and safe work behaviour, and management practices. Finally, this study gauges empirically the influence of cultural dimensions on workers' perceptions, attitudes, and safe work behaviour and managers' safety practices. The analysis showed that managers' operational practices on site have the most statistically significant relationship with workers' attitudes and perceptions. It was also found that the more collectivistic and higher uncertainty avoidance attitude of workers, the stronger their safety attitudes and perceptions will be.

The purpose of health and safety procedures in the construction industry is to ensure the health, safety and wellbeing of workers. Due to the relative high accident rates on construction sites internationally, strong health and safety legislation has been devised to minimize accident causation and promote construction worker’s safety. However, little attempt has been made to research the effects of those comprehensive health and safety interventions on the individual safety behaviour on construction sites. Therefore, the objective of this research was to investigate any changes to the health and safety on construction sites, specifically from the construction workers’ perspective. The research also included an assessment relating to the effects of the recession on construction workers’ health and safety practices in Ireland. The main findings demonstrated that company size predicted site safety behaviour on construction sites. Most noticeably, large organisations demonstrated higher levels of compliance to safety procedures, while medium sized organisations showed signs of regression and cited cost pressures as the main influencing factor. Small organisations reported a low level of compliance due to the cost required to ensure compliance to safety procedures and practices on construction sites.

Big data have become an integral part of various research fields due to the rapid advancements in the digital technologies available for dealing with data. The construction industry is no exception and has seen a spike in the data being generated due to the introduction of various digital disruptive technologies. However, despite the availability of data and the introduction of such technologies, the construction industry is lagging in harnessing big data. This paper critically explores literature published since 2010 to identify the data trends and how the construction industry can benefit from big data. The presence of tools such as computer-aided drawing (CAD) and building information modelling (BIM) provide a great opportunity for researchers in the construction industry to further improve how infrastructure can be developed, monitored, or improved in the future. The gaps in the existing research data have been explored and a detailed analysis was carried out to identify the different ways in which big data analysis and storage work in relevance to the construction industry. Big data engineering (BDE) and statistics are among the most crucial steps for integrating big data technology in construction. The results of this study suggest that while the existing research studies have set the stage for improving big data research, the integration of the associated digital technologies into the construction industry is not very clear. Among the future opportunities, big data research into construction safety, site management, heritage conservation, and project waste minimization and quality improvements are key areas.

The construction industry is globally known as one of the most hazardous workplaces. Companies in the construction sector are undeniably often focused on completing projects on time, which results in tight work schedules and increases the risks of regular construction site activities, especially for the public who lives in the area. Inadequate rules and regulations in public safety and construction sites not practicing the safety practices to protect the public from harm are potential to cause public accidents to happen. Additionally, little improvement in safety practices at the construction sites and lack of awareness in implementing proper safety practices at a construction site could cause the increasing the rate of public accidents too. This study merely aims to explore the safety practices to be implemented at a construction site in a way to prevent public accidents from occurring. In order to achieve the aim, this study has two (2) objectives; 1: to determine the experience in handling accident cases involving the public at a construction site, and, objective 2: to explore the safety practices to be implemented at the construction site. For this preliminary survey, the qualitative research design was selected and the total number of five (5) professional individuals specialized in safety and health in construction sites were chosen as interviewees based on their experiences in handling public safety issues in construction sites. The results show the most recommended safety practices that need to be implemented which is barricade all entrances and exits of the construction site to prevent access from the public. This study provides good insights to the Department of Occupational Safety and Health (DOSH), National Institute of Occupational Safety and Health (NIOSH), and Construction Industry Development Board (CIDB) in identifying the need for safety practices to prevent public accidents at the construction site in congested urban areas.

- Construction Safety is an essential talk topic all over the world especially in countries like Nepal where the construction sector is a major contributor to the economy. Nepal is a developing country. The growth is driven by urbanization to a large degree. We are constructing buildings and all other infrastructures to satisfy the needs of the people who live in the city (water supply, power supply). The rate of construction of infrastructures is increasing. In Nepal most of the projects are labor intensive. The construction industry involves large skilled and unskilled personnel. Nepal is young in practicing construction and lacks experience. Any construction project has risk of accidents as they are inevitable. The site accidents are the most important factor to be considered for a project to be successful. We do not have the exact accident data recording system here in Nepal. The basic problem in Nepal is negligence towards the constructional safety and lack in use of proper safety equipment’s and tools. In addition to that labors are unskilled, illiterate and untrained. Accidents that result in the loss of life, damage of property and many injuries during construction are the major challenges of construction field. The major causes of accident in construction industries are physical, physiological, psychological and mental. One of the main causes of accidents is the unsafe working conditions. Also due to low level of awareness towards safety and importance of human values, development of effective safety management system etc. is the major problem of safety at construction sites in Nepal. Key Words: Construction Safety, Nepal, Safety Practices, Construction Industry, Workplace Safety, Safety Challenges, Safety Training Programs, Regulatory Frameworks, Safety Culture, Construction Accidents

Purpose – The purpose of this paper is to present findings of a capacity building project on construction health and safety that is recently completed in Pakistan. The major objectives of this project are: first, to benchmark the current state of construction health and safety practices in Pakistan and to identify the data needs for continuous performance measurement; second, to develop health and safety guidelines; third, to develop adequate educational and training material; and finally, to improve the existing regulatory infrastructure for worker health and safety. Design/methodology/approach – Mixed-methods approach is adopted for data collection which included site observations, surveys, semi-structured interviews, and case studies. The methodology consists of following major tasks: first, literature review and study of best practices; second, investigation of existing safety practices and development of guidelines; third, educational and training programs for construction professionals and educators; and finally, development of a strategic framework for continuous improvement in construction safety culture, laws, and practices. Collected data were analyzed using various qualitative and quantitative data analysis methods. Findings – The enforcement of health and safety regulations on construction sites is very limited in Pakistan. Procedures for formulating, implementing, and monitoring safety rules and regulations are weak, and the implementation of safety management systems does not occur on most construction sites. The paper presents a detailed plan to improve the health and safety culture, laws, and practices in Pakistan. Practical/implications – Detailed proposals for improving existing construction health and safety laws and regulations are prepared for relevant regulatory and statutory bodies and ministries in Pakistan. From an educational perspective, comprehensive health and safety training material are developed and training workshops are conducted in major cities of Pakistan. Over 1,000 construction professionals benefited from these workshops. Social/implications – The project helped in raising awareness about construction health and safety in Pakistan. Originality/value – The project benchmarked existing health and safety practices in Pakistan. It identified data needs for continuous monitoring of health and safety performance and provided a mechanism for collecting such data. The project produced international standard health and safety training material that can fulfill the local needs. The project deliverables are extremely helpful for other developing countries in the region.

Purpose Despite the continuous development and application of new digital technologies in the construction industry, there has been little research on digital technology trajectories in the construction industry. The study addresses the issue faced by the construction industry in exploring digital technology trajectories: how to comprehensively identify and analyse digital technology pathways across multiple technology fields in the construction industry. Design/methodology/approach Firstly, the digital technology patent identification and classification method based on text mining is used to identify digital technology patents and construct a digital technology innovation network. Second, the main path of the digital technology innovation network is identified with the help of SPNP. Then, the subpaths of the digital technology innovation network are identified with the help of the Louvain algorithm and SPNP. Finally, starting from the technology nodes where the main path and subpaths intersect, the technological similarity of the paths is analysed to explore the evolutionary characteristics of the technology trajectories. In light of this, the developed method is applied to the global construction industry patent dataset to analyse the trajectories of digital technologies. Findings The technological innovation path in the construction industry starts with construction materials and gradually expands to intelligence, automation and digital data processing technology. Equipment and devices with electronic digital data processing capabilities as well as improvements in green building technologies and user experience-enhancing technologies, may be the future of the construction industry. With the increasing demand for green buildings and intelligent buildings, the direction of digital technology innovation in the construction industry is gradually tilted towards these areas. In addition, influenced by geographic and economic factors, there is a spatial clustering effect of digital technology innovation in the construction industry. Research limitations/implications Future research should analyse in depth the performance of different countries and regions in digital technology innovation and explore the root causes, motivations and influencing factors behind it, such as the policy environment, the level of the economy and the investment in research and development. Exploring the reasons affecting digital technology innovation can help formulate more targeted policies and promote cooperation and exchange of digital technology innovation in the global construction industry. Meanwhile, to solve the problems of overly broad IPC categorization and the difficulty of accurately describing cross-field innovations, combining IPC co-occurrence networks with patent citation networks is an effective strategy. This strategy can track technologically interrelated patents and provide more specific contents to know the advantages and challenges of the construction industry in the field of digital technology innovation. Practical implications The study has practical implications for the construction industry. The identification of digital technology innovation trajectories provides valuable insights for industry firms and research institutes. It helps them understand the current and future directions of digital technology in construction, enabling them to stay at the forefront of technological advancements. The findings highlight the importance of focusing on areas such as solar energy utilisation, green energy, intelligence, automation and data applications. This knowledge can guide firms in developing new building materials, incorporating digital information technologies and enhancing user experiences. The study’s results can inform strategic decision-making, technology adoption and innovation management in the construction sector. Social implications The social implications of this study are significant for various stakeholders. The identification of digital technology innovation trajectories in the construction industry highlights the potential benefits for society. The focus on green energy, intelligent buildings and enhanced user experiences aligns with the increasing demand for sustainability, energy efficiency and comfortable living environments. These technological advancements can contribute to reducing environmental impact, improving quality of life and promoting sustainable development. The findings can inform policymakers, urban planners and architects in shaping regulations, designing sustainable cities and creating buildings that prioritize energy efficiency and user well-being. Ultimately, the study’s social implications aim to foster a more sustainable and livable built environment. Originality/value An identification method integrated with SPNP and the Louvain algorithm is developed to map digital technology innovation trajectories in the construction industry. This study helps to reveal the trajectories of digital technology innovation, provides new perspectives, insight and ideas for research in related fields and has great potential for applications in practice to promote the innovation and development of the construction industry.

Professionals without a profession: Occupational safety and health professionals in Denmark

Construction industry is one of the most hazardous industries. Accidents may occur during construction which results in serious injuries and death to employees and also may cause severe damage to equipment. Hence it is important to prevent or minimize accidents in the construction site. Safety during construction is very important for each employee. This project deals with job site safety analysis in construction site by identifying the causes for accidents and implementing solutions for preventing the accident in the construction industry. From the literatures it was studied that statistical analysis is better way to analyse the construction jobsite safety and important factors that are affecting the safety in construction is identified from the literatures. Questionnaire regarding the factors affecting safety in construction site is also prepared. Then primary data should be collected from the various construction companies and secondary data should be collected from their clients. Then the data’s are ranked by two different techniques, primary data was ranked by using Relative important index method and secondary data was ranked by the Garrett’s ranking technique. Then the companies which are following safe safety procedures should be found out using Statistical analysis. This data is analysed in Statistical Package for Social Science (SPSS) software and the major factors which affect safety in construction should found out through comparison of primary and secondary data by paired sample t-test. With this approach, it is possible to evaluate the uncertainty regarding safety in construction.

The construction industry has been experiencing many occupational accidents as working on construction sites is dangerous. To reduce the likelihood of accidents, construction companies share the latest construction health and safety news and information on social media. While research studies in recent years have explored the perceptions towards these companies’ social media pages, there are no big data analytic studies conducted on Instagram about construction health and safety. This study aims to consolidate public perceptions of construction health and safety by analyzing Instagram posts. The study adopted a big data analytics approach involving visual, content, user, and sentiment analyses of Instagram posts (n = 17,835). The study adopted the Latent Dirichlet Allocation, a kind of machine learning approach for generative probabilistic topic extraction, and the five most mentioned topics were: (a) training service, (b) team management, (c) training organization, (d) workers’ work and family, and (e) users’ action. Besides, the Jaccard coefficient co-occurrence cluster analysis revealed: (a) the most mentioned collocations were ‘construction safety week’, ‘safety first’, and ‘construction team’, (b) the largest clusters were ‘safety training’, ‘occupational health and safety administration’, and ‘health and safety environment’, (c) the most active users were ‘Parallel Consultancy Ltd.’, ‘Pike Consulting Group’, and ‘Global Training Canada’, and (d) positive sentiment accounted for an overwhelming figure of 85%. The findings inform the industry on public perceptions that help create awareness and develop preventative measures for increased health and safety and decreased incidents.

Purpose Contrasted with some other industries, the construction industry has been linked with the most noteworthy accident occurrence rate, the majority of which has been related to poor health and safety practises. This paper therefore sets out to conduct a comprehensive review of the critical success factors that can aid sustainable health and safety practises on construction sites in Malaysia. Design/methodology/approach The review focussed heavily on published reports, drawn between the years 2000 and 2022. The Scopus database was used for gathering the articles reviewed for this study. Findings After reviewing various literature studies, a total of 106 critical success factors were identified. All these factors were then categorised under the three pillars of sustainability. A total of 48 factors were grouped under the economic factors, 37 factors were grouped under the social factors and the remaining 21 factors were grouped under the environmental factors. Originality/value This paper conducted a comprehensive review of the critical success factors for bridging sustainability and health and safety. This study will help in developing a sustainable health and safety model that can drastically reduce the accident rate on the construction site.

Purpose The purpose of this study is to investigate the potential of using computer vision and deep learning (DL) techniques for improving safety on construction sites. It provides an overview of the current state of research in the field of construction site safety (CSS) management using these technologies. Specifically, the study focuses on identifying hazards and monitoring the usage of personal protective equipment (PPE) on construction sites. The findings highlight the potential of computer vision and DL to enhance safety management in the construction industry. Design/methodology/approach The study involves a scientometric analysis of the current direction for using computer vision and DL for CSS management. The analysis reviews relevant studies, their methods, results and limitations, providing insights into the state of research in this area. Findings The study finds that computer vision and DL techniques can be effective for enhancing safety management in the construction industry. The potential of these technologies is specifically highlighted for identifying hazards and monitoring PPE usage on construction sites. The findings suggest that the use of these technologies can significantly reduce accidents and injuries on construction sites. Originality/value This study provides valuable insights into the potential of computer vision and DL techniques for improving safety management in the construction industry. The findings can help construction companies adopt innovative technologies to reduce the number of accidents and injuries on construction sites. The study also identifies areas for future research in this field, highlighting the need for further investigation into the use of these technologies for CSS management.

Construction industry is one of the largest industries in the global economy. In today's construction industry, where time and profit margins are crucial, modern construction equipments plays a crucial role. Hand signals are frequently used by construction workers on the job site to communicate, as they are easy and effective. However, there can be a risk of miscommunication or misinterpretation with hand signals, resulting in mistakes and potential hazards on the construction site. This paper presents a comprehensive study on crane accidents in construction sites, with a particular focus on the communication between crane operators and signal men through hand signals. The study begins with a literature review on the causes and effects of crane accidents, statistics and incidents on construction sites. The study then investigates the current practices of hand signals on construction sites and highlights the associated safety concerns. The study concludes that the misinterpretation of hand signals between the signal man and the crane operator is a significant contributor to crane accidents. To address this issue, the paper recommends the development of a real-time hand signal detection system for material handling using machine learning and computer vision. The proposed solution will reduce the strain on signal men and improve communication between the signal man and the crane operator, thereby enhancing safety in construction sites. Keywords: Safety Study, Crane Accidents, Construction Sites, Human Error, Hand Signals, Material Handling, Construction Safety, Signal Man