Abstract
In this paper, the effect of the grating parameters (i.e. gratings length (Lg) and the induced index profile (Δn)); the temperature variation (T) and the applied strain change on the fiber Bragg Grating (FBG) 3dB-bandwidth (i.e. full width-half maximum (FWHM)) have successfully investigated numerically using MATHCAD software. Results show that for Lg < 7 mm, the FBG 3dB-bandwidth (i.e. full width-half maximum (FWHM)) value shows a good reliable and visible impact. Otherwise, there are no significant effects except for increasing the FBG reflectivity. Also, results show that the FWHM value has affected by the change of the Δn value. In contrast, results show that there is no significant effect of the temperature on the FWHM value. Also, results shown that the dependence of the Bragg wavelength (λB) upon both strain and temperature variations is lies within the range of 0.462 – 0.470 fm με-1/C°
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Iraqi Journal for Electrical and Electronic Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
