Testing of the ITER plasma position reflectometry high-field side in-vessel antenna assembly prototype.

Abstract

The ITER plasma position reflectometry diagnostic aims to provide measurements of the edge plasma to correct or supplement the magnetics for plasma position control. It consists of five reflectometers, two of which have components installed inside the vessel. One of these systems probes the plasma from the high-field side using a bistatic array of small pyramidal horns located in the gap between two blankets. Electromagnetic simulations have shown that the blankets shape the radiation pattern and need to be considered as part of the antenna. Full-wave plasma simulations have confirmed these results and have also shown that the first-wall geometry may induce measurement errors above the required margin. To further address these issues, we manufactured a prototype of the high-field side antenna, which includes a mock-up of the blanket modules. Here, we present the results of the prototype tests, with and without the blankets, using a metallic mirror as a target. The signals reflected from the mirror are used to derive the mirror distance and assess the precision of the measurements under different arrangements. The sensitivity to the blankets' installation tolerances is also assessed by changing the antennas' position with respect to the blankets' surfaces and cut-outs.