Abstract
We have studied the far infrared behavior of high -T/sub c/ superconductor-normal metal-superconductor (SNS) microbridges with T/sub c/>85 K and critical current-resistance products (I/sub c/R/sub N/) as high as 10 mV at 4 K. These are the highest I/sub c/R/sub N/ products reported to date for microfabricated Josephson junctions of any material. The junctions were integrated at the feeds of planar log-periodic antennas made from Au thin films. The junctions had dc normal state resistances R/sub N/ between 6 and 38 /spl Omega/, reasonably well matched to the antenna's estimated RF impedance of 53 /spl Omega/. Far infrared laser radiation at 404, 760, and 992 GHz induced distinct Shapiro steps (i.e. constant voltage steps at voltages n(hf/2e), n=1,2,...) in the current voltage characteristics as well as modulation of the critical current. Steps were observed at voltages up to 17 mV and 6 mV, at temperatures of 9 K and 57 K respectively. This corresponds to maximum Josephson oscillation frequencies of 8 and 3 THz at these temperatures. These are the first far infrared measurements performed on high T/sub c/ junctions. Measurements of the power, frequency, and temperature dependence of the Shapiro steps are presented and discussed in the context of a resistively and capacitively shunted junction (RCSJ) model. A value of 4.5 fF for the junction capacitance is inferred from the hysteresis of the slightly underdamped current-voltage characteristics.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.