Abstract
Knowledge of the temperature sensitivity of foamed asphalt stiffness is very important in mix and structural design, field non-destructive testing and advanced research. However, this subject has not been studied extensively, especially the effects of the stress state on the temperature sensitivity, which is essential to understand the behavior of weakly bonded granular materials. This paper first presents triaxial resilient modulus testing results of foamed asphalt treated materials with various asphalt contents at various temperatures. General observations are made in terms of the effects of the bulk stress, deviator stress, temperature and their interactions. Based on these observations, the temperature sensitivity coefficient of foamed asphalt stiffness is defined and a simplified model to predict foamed asphalt mix stiffness at any triaxial stress state and temperature is proposed and validated. A procedure to normalize back-calculated resilient modulus to a standard temperature is also presented. The essential step of this procedure is to estimate the temperature sensitivity coefficient based on the field test results at various temperatures. Finally, an example is presented comparing the stiffness of a foamed asphalt material over two years. It was found that the stiffness did not change significantly over the two years period, despite the accumulation of traffic loading.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.