Abstract
Abstract Biomass has been used as a renewable energy resource for years. The coconut tree, considered woody biomass, grows in the tropics and is abundant in the Philippines. To determine the performance of the biomass gasification power system (BGPS) using torrefied coconut shells (TCS), a 1.8-kVA BGPS was designed, fabricated, and tested. The TCS with a calorific value of 34.37 MJ/kg was used as feedstock to profile the temperature of BGPS. The temperature increased from the feeder at 79 °C to a maximum of 904 °C at the combustion zone and goes down to 779 °C at the reduction zone, which causes the breaking of the chemical structure of the torrefied coconut shells to release carbon monoxide (CO), hydrogen (H2) and other contaminants that form part the producer gas. The temperature at the inlet of the internal combustion engine (ICE) generating set had reduced to 37 °C. To improve the performance of the BGPS, it is recommended to review and enhance the cooler’s design to lessen the temperature of the producer gas to at least 25 °C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
