Abstract
Based on the simulation results of the typical rural ultra-low energy building (ULEB) in five different climatic regions of China, three indicative technical parameters for paralleled-loop exhaust air heat pump (PEAHP) R&D which are nominal heating-cooling capacity, maximum required fresh air to return air ratio (MFRR) and system energy efficiency grades were calculated and summarized according to the demand of indoor thermal comforts by using statistic method. The nominal heating-cooling capacities were determined according to the peak loads, which are 6.84-2.01 kW, 5-2.96 kW, 3.9-4.6 kW, 3.08-5.02 kW, and 3.4-0.46 kW in the ULEB of Harbin, Beijing, Shanghai, Guangzhou, and Kunming, respectively. To ensure both thermal comforts and energy conservation, during the heating season, full fresh air supply is suggested in Beijing and the 1:0.5 MFRR is suggested in Harbin, Shanghai, Guangzhou, and Kunming. During the cooling season, the 1:5 MFRR is suggested in Shanghai and Guangzhou, the 1:3, 1:1.5, and 1:0.5 MFRR are suggested in Harbin, Beijing and Kunming, respectively. The PEAHP energy efficiency grades 1~5 are 7.92~11.7, 7.58~11.5, 7.5~11.35, 6.12~9.27, and 4.64~7.03 during the heating season of Harbin, Beijing, Shanghai, Guangzhou, and Kunming, respectively, and are 2.33~3.54, 3.93~5.96, 4.61~6.98, 4.62~6.99, and 2.04~3.1 for the cooling season, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
