Tailings-nonwoven geotextile filter compatibility in mining applications

Abstract

Nonwoven geotextiles have been commonly used in filtration and drainage of geotechnical engineering works. This paper presents a study on the use of such materials in drainage and filtration systems of tailings dams. Different combinations of tailings and geotextiles were submitted to gradient ratio (GR) tests under confinement in the laboratory with varying values of stress levels and hydraulic gradients. The results of GR tests under confining stresses up to 2000 kPa are presented and discussed. The dimensions of the tailings particles entrapped in the geotextile specimens and those that piped through the geotextile were also assessed. Geotextile specimens from the drainage system of a tailings dam were exhumed for analyses, as part of the research programme. The results obtained showed that stress levels and the hydraulic gradients used in the tests influenced the behaviour of the system. Physical and microscopic analyses of the specimens tested showed greater geotextile impregnation by tailings particles in the field than in the laboratory. The overall performance of the geotextiles tested under laboratory conditions was satisfactory. However, in the field segregation of tailings particles and transport of fines in suspension can subject the filter to more complex and severe clogging mechanisms, not properly simulated in current standard testing procedures.