Abstract
Low pressure carburizing cycles were carried out on tantalum samples. A Ta2C precipitates layer is present under the TaC and Ta2C surface layers. As the TaC and Ta2C layers, the Ta2C precipitates layer (TPL) grows by carbon diffusion in tantalum matrix. Specific zones with low precipitates content were observed at the bulk surface and in the tantalum grain boundaries. Other zones with lower precipitates content are also present in carburized and annealed samples. All the zones with low precipitates content are induced by the Ta2C precipitation mechanism described by Dahmen et al. [1,2]. Indeed, Ta2C needs vacancies to precipitate. If vacancy sinks are present at the bulk surface, at a grain boundary or in a dislocation, then Ta2C precipitation is highly reduced. Another effect of the annealing treatment is an increase of the Ta2C precipitates layers growth rate.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
