Abstract
Chromium (Cr) coating is a potential candidate material for improving the oxidation resistance and extending rail service life of zirconium (Zr) alloys used in nuclear fuel cladding materials. This study investigates the effect of temperature on the effectiveness of Cr coating on Zr-4 alloy deposited using arc ion plating, revealing the microstructure evolution mechanism of Cr coating in high temperature steam environments. The research results indicate that the oxidation of the Cr coating is slow at 900-1000 °C and that the surface oxide layer, to some extent, hinders the diffusion of oxygen from the outside to the inside. However, at higher temperatures, the oxidation rate of the Cr coating is accelerated, and large bubbles and voids are formed at the interface between the Cr2O3 layer and the residual Cr layer, resulting in the fracture of the oxide layer. At this time, the protective performance of the Cr coating is completely lost. Note that the simultaneous inward diffusion of oxygen and outward diffusion of Zr trigger the occurrence of redox reactions, generating a ZrO2 network. Changes in steam temperature significantly affect the oxidation behavior of Cr coating. As a driving force, temperature accelerates the diffusion of oxygen to the substrate. Conversely, the formed zirconia network also promotes the failure of the Cr coating.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
