Abstract
This work presents a systematic method for analysis and optimization of specific energy production (SEP) of pressure retarded osmosis (PRO) systems employing single‐stage configuration as well as multistage design with interstage hydro‐turbines. It is shown that the SEP normalized by the draw solution feed osmotic pressure increases with the number of stages as well as a dimensionless parameter . As compared to the single‐stage PRO, the multistage arrangement not only increases flux and volume gain, but also allows a stage‐dependent, progressively decreasing hydraulic pressure, both of which contribute to enhanced SEP and power density. At the thermodynamic limit where γtot goes to infinity, the theoretical maximum SEP by an N‐stage PRO system is , where qtot is the ratio of the draw solution flow rate at the outlet to the inlet on the system level. For single‐stage PRO, it is no more than π0. For infinite number of stages, the theoretical limit becomes . SEP under realistic conditions and practical constraints on multistage design are discussed. © 2017 American Institute of Chemical Engineers AIChE J, 63: 144–152, 2018
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
