Abstract
Hybrid polyetherimide (PEI)–silica membranes were synthesized. The aim was to obtain improved materials for gas separation media. The inorganic material was prepared via the sol–gel method through the hydrolysis of tetraethoxysilane (TEOS). The influence of the reaction conditions on the final membrane morphology and properties were studied. Scanning electron microscopy (SEM), energy-dispersive X-ray analysis (SEM–EDX), and Fourier transform infrared spectroscopy (FTIR) were used to characterize the PEI and PEI–silica composite membranes. The evolution of TEOS hydrolysis and the condensation processes were verified by FTIR studies. The silica–polymer interaction was also analyzed. The SEM micrographs showed how the membranes distinct morphologies depended upon synthesis parameters and preparation techniques (presence of coupling agent, TEOS polymerization in situ or not, silica content and membranes redissolution). The permeation rates of CO2, CH4, O2, N2, and H2 through the pure polymer and hybrid membranes were measured and showed an increase of gas permeability for hybrid membranes but, the CO2/CH4 and O2/N2 selectivities decreased compared to PEI membranes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.