Abstract
Nanocomposite films grown by incorporating varying concentrations of Yttrium, a d-block rare-earth ion, into the binary chalcogenide Arsenic selenide host matrix is here presented. Films were grown via the wet-chemical electro-deposition technique and characterized for structural, optical, surface morphology, and photoluminescence (PL) properties. The X-ray Diffraction (XRD) result of the host matrix (pristine film) showed films of monoclinic structure with an average grain size of 36.2 nm. The composite films, on the other hand, had both cubic YAs and tetragonal YSe structures with average size within 36.5–46.8 nm. The fairly homogeneous nano-sized films are shown by the Scanning Electron Microscopy (SEM) micrographs while the two phases of the composite films present in the XRD patterns were confirmed by the Raman shifts due to the cleavage of the As-Se host matrix and formation of new structural units. The refractive index peaked at 2.63 within 350–600 nm. The bandgap energy lies in the range of 3.84–3.95 eV with a slight decrease with increasing Y addition; while the PL spectra depict emission bands across the Vis-NIR spectral regions. Theoretically, the density functional theory (DFT) simulations provided insight into the changes induced in the structure, bonding, and electronic properties. Besides reducing the bandgap of the As2Se3, the yttrium addition has induced a lone pair p-states of Se contributing nearby to Fermi energy level. The optical constants, and structural and electronic features of the films obtained present suitable features of film for IR applications as well as in optoelectronics.
Highlights
Pragmatic research on nanocomposite films for integrated photonics (IP) and optoelectronic applications is on the rise [1,2]
Nanocomposite films of Y/As2Se3 were successfully grown via the solution-phase electro-deposition technique
The incorporation of rare-earth ions into the host material with the subsequent formation of two mixed phases of composites was successfully carried out. This is vividly seen from the presence of new structural units due to the varying concentrations of Yttrium ions, as
Summary
Pragmatic research on nanocomposite films for integrated photonics (IP) and optoelectronic applications is on the rise [1,2] Synthesizing and fabricating these nanocomposites for IPs require nanomaterials with characteristics non-linear optical features, as noted by Bardosova et al [3]. The wet-chemical electro-deposition (ED) technique was used to synthesize a Yttriumdoped arsenic selenide film dispersed on a fluorine-doped SnO2(FTO) glass substrate under room temperature. This technique offers a better alternative to the afore-listed techniques in terms of reduced cost, deposition time, less complicatedness during use, size control, and reproducibility of films [20]. The ED technique has been successfully deployed to synthesize crystalline chalcogenide-based PCM films, window layer material for solar cells, and optoelectronic applications [20]
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
