Abstract
In this study, three PCL-based polyurethane acrylates were synthesized and further formulated into twelve resins for digital light processing (DLP) 3D printing. Three PCL diols with different molecular weights were synthesized via ring-opening reaction of ε-caprolactone on diethylene glycol, with the catalyst stannous octoate. Isophorone diisocyanate (IPDI) was reacted with 2-hydroxyethyl acrylate (2-HEA) and the PCL diols form PCL-based polyurethane acrylates. Twelve resins composed of different percentages of PCL-based polyurethane acrylates, poly (ethylene glycol) diacrylate (PEGDA), propylene glycol (PPG) and photo-initiator were further printed from a DLP 3D printer. The viscosities of twelve resins decreased by 10 times and became printable after adding 30% of PEGDA. The degree of conversion for the twelve resins can reach more than 80% after the post-curing process. By changing the amount of PEGDA and PPG, the mechanical properties of the twelve resins could be adjusted. PUA530-PEG-PPG (70:30:0), PUA800-PEG-PPG (70:30:0), and PUA1000-PEG-PPG (70:30:0) were successfully printed into customized tissue scaffolds. Twelve PCL-based polyurethane photo-curable resins with tunable mechanical properties, cytotoxicity, and degradability were successfully prepared. With the DLP 3D printing technique, a complex structure could be achieved. These resins have great potential for customized tissue engineering and other biomedical application.
Highlights
Polyurethanes (PU) have been widely applied in biomedical applications for decades
Many of the previous studies reported the thermoplastic polyurethane for fused deposition modeling (FDM) method rather than photo-curable polyurethanes for digital light processing (DLP) 3D printers
Three different PCL diols were synthesized via ring-opening polymerization of -caprolactone (ε-CL) in the presence of diethylene glycol (DEG) (Figure 1)
Summary
Polyurethanes (PU) have been widely applied in biomedical applications for decades. Polycaprolactone (PCL) were chosen as the diol. PCL has been widely used in the biomedical field, due to its excellent biocompatibility [4,5]. With the development of 3D printing technologies, researchers have started to synthesize PCL-based polyurethanes with 3D printing in recent years [6]. Many of the previous studies reported the thermoplastic polyurethane for fused deposition modeling (FDM) method rather than photo-curable polyurethanes for DLP 3D printers
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.