Synthesis and characterization of chitosan-modified membrane for urea slow-release fertilizers

Abstract

BackgroundUrea is a fertilizer widely used by farmers, especially vegetable farmers, due to its high nitrogen content, around 46 %. However, plants only use a small amount of nitrogen, a maximum of 35 %, while the remaining nitrogen is wasted and released into the environment. Undeniably, it causes increases production costs and environmental problems. A slow-release urea fertilizer (SRF) has been formulated to resolve these issues. MethodsIn this study, the membrane was made of chitosan with several crosslinking agents such as Tripolyphosphate (TPP). In addition, calcium ion bonds are expected to increase the interaction with urea fertilizer through the encapsulation process. The resultsOur data showed that urea slow-release fertilizer (SRF) with the chitosan/TPP/Ca membrane, was successfully synthesized. This membrane has the characteristics of a thin white layer that is transparent. The physical and chemical characterization of SRF membranes with various coating membrane variations showed that the chitosan/TPP/Ca-urea membrane has Young's modulus of 7.75–22.05 N/mm2, swelling of 109.52–132.62 % and porosity of 0.756–1.06 %. Functional group analysis shows that several spectral changes indicate the presence of crosslinking process between the chitosan functional groups and TPP. The urea release results show that the membrane is released through a diffusion mechanism. Furthermore, SEM results show that these membranes have pores with various shapes and sizes. ConclusionBased on the result, it can be concluded that chitosan membrane modification with the addition of TPP and calcium oxide provides improved membrane characteristic cs including degree of development, hydrophobicity, membrane stress, and nitrogen release on the membrane. This membrane shows is indicating suitability as a slow-release fertilizer.