Abstract

Water surface plasma (WSP) discharge technology coupling with Fe2+ and peroxymonosulfate (PMS) was investigated for the degradation of malachite green (MG) dye wastewater. The effects of Fe2+ dosage, PMS dosage, input voltage and solution initial conductivity on the degradation of MG were investigated. When the Fe2+ dosage was 125 μM, PMS dosage was 0.5 mM and input voltage was 16 kV, the degradation performance and reaction rate of MG reached 96.3% and 0.219 min−1 within the discharge time of 15 min. When increasing the initial conductivity from 31.1 μS/cm to 1000 μS/cm, degradation efficiency of MG decreased from 97.9% to 94.1% with the decrease of only 3.8% and degradation rate declined by only 0.074 min−1.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.